Blind Spot Assist - Mercedes-Benz CLA Operator's Manual

Hide thumbs Also See for CLA:
Table of Contents

Advertisement

Information in the multifunction display
Briefly showing detected traffic signs in
the multifunction display
Activate the Speed Limit Assist warning
X
function using the on-board computer
(
page 205).
Y
A traffic sign indicating a speed limit or the
end of a speed limit appears in the multi-
function display for around five seconds as
soon as it is detected. Any other informa-
tion in the multifunction display is hidden
for this period.
Maximum permissible speed (example)
:
Maximum permissible speed for vehicles
;
subject to the restriction in the additional
sign (example)
Additional character in fog
=
Speed Limit Assist is available and
?
switched on
Permanently showing detected traffic
signs in the multifunction display
Display the assistance graphic using the
X
on-board computer (
A traffic sign indicating a speed limit or the
end of a speed limit appears in the multi-
function display as soon as it is detected.
Traffic sign : indicating a speed limit is gen-
erally displayed until:
a traffic sign indicating the end of the speed
R
limit is detected.
you make a turn.
R
you leave or enter a city.
R
page 204).
Y
Driving systems
the road type changes (e.g. highway, coun-
R
try road).
you have traveled a certain minimum dis-
R
tance without the traffic sign being repea-
ted or detected again.
Lane Tracking package
General notes
The Lane Tracking package consists of Blind
Spot Assist (
page 191) and Lane Keeping
Y
Assist (
page 193).
Y

Blind Spot Assist

General notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from a speed of
approximately 20 mph (30 km/h). A warning
display in the exterior mirrors draws your
attention to vehicles detected in the moni-
tored area. If you then switch on the corre-
sponding turn signal to change lanes, you will
also receive a visual and audible collision
warning. For this purpose, Blind Spot Assist
uses sensors in the rear bumper.
Important safety notes
G
WARNING
Blind Spot Assist does not react to:
vehicles overtaken too closely on the side,
R
placing them in the blind spot area
vehicles which approach with a large speed
R
differential and overtake your vehicle
As a result, Blind Spot Assist may not give
warnings in such situations. There is a risk of
an accident.
Always observe the traffic conditions care-
fully, and maintain a safe lateral distance.
Blind Spot Assist is only an aid. It may fail to
detect some vehicles and is no substitute for
attentive driving.
i
USA only:
191
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents