Function - Mercedes-Benz CLA Operator's Manual

Hide thumbs Also See for CLA:
Table of Contents

Advertisement

Press release button ? on belt buckle =.
X
Guide belt tongue ; back to belt guide :.
X
Belt warning for the driver and front
passenger
Every time the engine is started, the 7
seat belt warning lamp lights up for six sec-
onds. It lights up regardless of whether the
driver's and front-passenger seat belts have
already been fastened. If the driver's and
front-passenger seat belts have already been
fastened, the 7 seat belt warning lamp
then goes out.
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. This warning tone stops after
a maximum of six seconds or once the driv-
er's seat belt is fastened.
If after six seconds, the driver or front
passenger have not fastened their seat belts
and the doors are closed:
the 7 seat belt warning lamp remains lit
R
as long as the driver's or front-passenger's
seat belt is not fastened
and
if a vehicle speed of 15 mph (25 km/h) is
R
exceeded, the 7 seat belt warning lamp
begins to flash. A warning tone also sounds
with increasing intensity for a maximum of
Occupant safety
60 seconds or until the driver or front
passenger have fastened their seat belts.
If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7 seat belt warning lamp lights up and a
warning tone sounds again.
The warning tone ceases even if the driver or
front-passenger seat belt has still not been
fastened after 60 seconds. The 7 seat belt
warning lamp stops flashing but remains illu-
minated.
After the vehicle comes to a standstill, the
warning tone is reactivated. The 7 seat
belt warning lamp flashes again if the vehicle
speed exceeds 15 mph (25 km/h).
The 7 seat belt warning lamp only goes
out if:
both the driver and the front passenger
R
have fastened their seat belts.
or
the vehicle is stationary and a door is open.
R
i
For more information on the 7 seat
belt warning lamp, see "Warning and indi-
cator lamps in the instrument cluster, seat
belts" (
page 243).
Y
Emergency Tensioning Devices, seat
belt force limiter
G
WARNING
Pyrotechnic Emergency Tensioning Devices
that have been deployed are no longer opera-
tional and are unable to perform their inten-
ded protective function. This poses an
increased risk of injury or even fatal injury.
Therefore, have pyrotechnic Emergency Ten-
sioning Devices which have been triggered
immediately replaced at a qualified specialist
workshop.
! If the front-passenger seat is not occu-
pied, do not engage the seat belt tongue in
the buckle on the front-passenger seat.
Otherwise, the Emergency Tensioning
Device could be triggered in the event of an
accident.
55
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents