Cornering Light Function - Mercedes-Benz CLA Operator's Manual

Turn housing cover : counter-clockwise
X
and pull it out.
Turn bulb ; counter-clockwise and pull it
X
out.
Insert the new bulb and engage it to the
X
stop.
Align housing cover : and turn it clock-
X
wise until it engages.
Turn signals (halogen headlamps)
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
X
pull it out.
Take the bulb out of bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : and turn it clockwise
X
until it engages.
Cornering light function (Bi-Xenon
headlamps)
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and pull it out.
Turn bulb holder ; counter-clockwise and
X
pull it out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
X
it clockwise.
Align housing cover : and turn it clock-
X
wise until it engages.
Changing the rear bulbs
Opening and closing the side trim pan-
els
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
Example: right-hand side trim panel
To open: release right or left side trim
X
panel : at the top and fold it down in the
direction of the arrow.
To close: insert side panel :.
X
Tail lamp
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (
X
Replacing bulbs
page 117).
Y
Z
117