Installing The Towing Eye - Mercedes-Benz CLA Operator's Manual

Hide thumbs Also See for CLA:
Table of Contents

Advertisement

Towing and tow-starting
308
! When COLLISION PREVENTION ASSIST
PLUS, DISTRONIC PLUS or the HOLD func-
tion is activated, the vehicle brakes auto-
matically in certain situations. To avoid
damage to the vehicle, deactivate these
systems in the following or similar situa-
tions:
when towing the vehicle
R
in the car wash
R
! Only secure the tow rope or tow bar at the
towing eyes. Otherwise, the vehicle could
be damaged.
! Do not use the towing eyes for recovery
purposes as this could damage the vehicle.
If in doubt, recover the vehicle with a crane.
! When towing, pull away slowly and
smoothly. If the tractive power is too high,
the vehicles could be damaged.
! The vehicle can be towed a maximum of
30 miles (50km). The towing speed of
30 mph (50km/h) must not be exceeded.
If the vehicle has to be towed more than
30 miles (50km), the front axle must be
raised or the entire vehicle raised and
transported.
! Do not tow with sling-type equipment.
This could damage the vehicle.
! If you tow or tow-start another vehicle, its
weight must not exceed the maximum per-
missible gross vehicle weight of your vehi-
cle.
! Vehicles with automatic transmission
must not be started by tow-starting. This
could otherwise damage the transmission.
It is better to have the vehicle transported
than to have it towed.
When towing a vehicle, the transmission must
be in position N.
The battery must be connected and charged.
Otherwise, you:
cannot turn the SmartKey to position 2 in
R
the ignition lock
cannot shift the transmission to position N.
R
i
Disarm the automatic locking feature
before the vehicle is towed (
You could otherwise be locked out when
pushing or towing the vehicle.
Installing/removing the towing eye

Installing the towing eye

Example: towing eye mounting covers
Remove the towing eye from the stowage
X
space.
The towing eye is located with the vehicle
tool kit under the trunk floor (
Vehicles with the TIREFIT kit: the towing
eye is beneath the tire inflation compres-
sor.
Press the mark on cover : inwards in the
X
direction of the arrow.
Take cover : off the opening.
X
Screw in and tighten the towing eye clock-
X
wise to the stop.
page 209).
Y
page 261).
Y

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents