Permanent Display - Mercedes-Benz G-Class Operator's Manual

Changing the instrument cluster settings
R
( page 179)
Y
Changing the light settings (
R
Changing the vehicle settings (
R
Changing the convenience settings
R
( page 181)
Y
Restoring the factory settings (
R
Instrument cluster
Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer:
tion allows you to choose whether certain dis-
plays appear in kilometers or miles in the mul-
tifunction display.
You can determine whether the multifunction
display shows some messages in miles or kilo-
meters.
Press the = or ; button on the steering
X
wheel to select the Sett.
Press the : or 9 button to select the
X
Inst. Cluster submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer:
tion.
You will see the selected setting:
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
Vehicles with instrument cluster in kilo-
R
meters: digital speedometer in the
menu
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
the service interval display
R
Selecting the permanent display function
You can determine whether the multifunction
page 179)
display permanently shows your speed or the
Y
outside temperature.
page 180)
Y
X
page 181)
Y
X
X
X
func-
X
i
Lights
Setting the daytime running lamps
i
menu.
X
X
func-
X
X
km or miles.
X
Trip
Further information on daytime running lamps
(
Surround lighting and exterior lighting
delayed switch-off
Navi menu
X
X
X
X
X
Menus and submenus
Press the = or ; button on the steering
wheel to select the Sett.
Press the : or 9 button to select the
Instr. Cluster submenu.
Press a to confirm.
Press the : or 9 button to select the

Permanent Display:

You will see the selected setting:
Temperature or Speedometer
Press the a button to save the setting.
Speed is displayed in mph.
This function is not available in Canada.
Press the = or ; button on the steering
wheel to select the Sett.
Press the : or 9 button to select the
Lights submenu.
Press a to confirm.
Press : or 9 to select the
Running Lights function.
If the Daytime Running Lights
switched on, the cone of light and the W
symbol in the multifunction display are shown
in red.
Press the a button to save the setting.
page 85).
Y
Press the = or ; button on the steering
wheel to select the Sett.
Press the : or 9 button to select the
Light submenu.
Press a to confirm.
Press : or 9 to select the
Lighting function.
When the Surround Lighting
activated, the cone of light in the multifunc-
tion display is shown in red.
Press the a button to save the setting.
menu.
function.
Outside
[mph].
menu.
Daytime
have been
menu.
Surround
function is
Z
179