Mercedes-Benz CLA Operator's Manual page 96

Panorama roof with power tilt/sliding panel
94
Problems with the sliding sunroof
G WARNING
If you do not reset the sliding sunroof after a malfunction or voltage supply interruption, then the
backing up function will malfunction or not work. The sliding sunroof closes with increased or
maximum force. Parts of the body could be trapped in the closing area in the process. This poses
an increased risk of injury or even fatal injury.
In such or similar situations always make sure that no parts of the body are in the closing area.
Always reset the sliding sunroof after a malfunction or voltage supply interruption.
! If the sliding sunroof still cannot be opened or closed as a result of a malfunction, contact
a qualified specialist workshop.
Problem
The sliding sunroof can-
not be closed and you
cannot see the cause.
Possible causes/consequences and M M Solutions
If the sliding sunroof is obstructed during closing and reopens
again slightly:
Immediately after the sliding sunroof blocks, pull the 3
X
switch in the overhead control panel down to the point of resist-
ance and hold it until the sliding sunroof is closed.
The sliding sunroof is closed with increased force.
If the sliding sunroof is obstructed again during closing and then
reopens slightly:
Immediately after the sliding sunroof blocks, pull the 3
X
switch in the overhead control panel down to the point of resist-
ance and hold it until the sliding sunroof is closed.
The sliding sunroof is closed without the anti-entrapment fea-
ture.