Setting - Mercedes-Benz CLA Operator's Manual

Mirrors
104
i Make sure that the exterior mirrors are
always folded out fully while driving. They
could otherwise vibrate.
i
If you are driving faster than 30 mph
(47 km/h), you can no longer fold in the
exterior mirrors.
Setting the exterior mirrors
This function is only available in Canada.
If the battery has been disconnected or com-
pletely discharged, the exterior mirrors must
be reset. The exterior mirrors will otherwise
not fold in when you select the "Fold in mir-
rors when locking" function in the on-board
computer ( page 210).
Y
Turn the SmartKey to position 1 in the igni-
X
tion lock ( page 141).
Y
Briefly press button :.
X
Folding the exterior mirrors in or out
automatically
This function is only available in Canada.
If the "Fold in mirrors when locking" function
is activated in the on-board computer
( page 210):
Y
the exterior mirrors fold in automatically as
R
soon as you lock the vehicle from the out-
side.
the exterior mirrors fold out again automat-
R
ically as soon as you unlock the vehicle and
then open the driver's or front-passenger
door.
i If the exterior mirrors have been folded in
manually, they do not fold out.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding
X
exterior mirrors: move the exterior mirror
into the correct position manually.
Vehicles with electrically folding exte-
X
rior mirrors: press and hold mirror-folding
button ( page 103) until you hear a click
Y
and then the mirrors engage in position.
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( page 103).
Y
Automatic anti-glare mirrors
The "Automatic anti-glare mirrors" function is
only available if the vehicle is equipped with
the "Mirrors package".
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror.
The mirrors do not go into anti-glare mode if
reverse gear is engaged or the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
General notes
The "Parking position of the exterior mirror on
the front-passenger side" function is only
available if the vehicle is equipped with the
"Mirrors package".
Setting and storing the parking position
Using reverse gear
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.