Display - Mercedes-Benz CLA Operator's Manual

Care
292
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
To open the cover of the rear view cam-
X
era: with the audio system/COMAND acti-
vated, press the W button.
Select System System
X
system/COMAND controller and press W
to confirm.
Select Rear view Rear
X
confirm.
Select Open camera cover Open camera cover
X
to confirm.
The rear view camera cover opens.
To clean the rear view camera: use clear
X
water and a soft cloth to clean camera
lens :.
i
The cover of the camera closes automat-
ically when the SmartKey is at position 0 in
the ignition lock.
Cleaning the exhaust pipe
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
pipe by cleaning it regularly, especially in win-
ter and after washing.
! Do not clean the exhaust pipe with acid-
based cleaning agents such as sanitary
cleansers or wheel cleaners.
Clean the exhaust pipe with a care product
X
tested and approved by Mercedes-Benz.
! AMG vehicles with black exhaust pipes:
do not use chrome polish to polish black
chromed screens. They will otherwise lose
their silky black shine. Rub the screen using
a lightly oiled cloth after every car wash.
Commercially available engine oils, WD 40
or Ballistol are suitable oils.
by turning cVd the audio
view camera camera and press W to
and press W
Interior care
Cleaning the display
! For cleaning, do not use any of the fol-
lowing:
alcohol-based thinner or gasoline
R
abrasive cleaning agents
R
commercially-available household clean-
R
ing agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to irrepara-
ble damage to the display.
Before cleaning the display, make sure that
X
it is switched off and has cooled down.
Clean the display surface using a commer-
X
cially available microfiber cloth and
TFT/LCD display cleaner.
Dry the display surface using a dry micro-
X
fiber cloth.
Cleaning the plastic trim
G WARNING
Care products and cleaning agents containing
solvents cause surfaces in the cockpit to
become porous. As a result, plastic parts may
come loose in the event of air bag deploy-
ment. There is a risk of injury.
Do not use any care products and cleaning
agents to clean the cockpit.
! Do not affix the following to plastic surfa-
ces:
stickers
R
films
R
scented oil bottles or similar items
R
You can otherwise damage the plastic.
! Do not allow cosmetics, insect repellent
or sunscreen to come into contact with the
plastic trim. This maintains the high-quality
look of the surfaces.