Table of Contents
Advertisement
FabiaTech Corporation
5.
USB Ports
The FX5653 supports a five port USB connector. Any USB device can be attached
to USB ports with plug-and-play supported.
1
4
6.
Connecting the Audio Microphone In/ EAR-Phone
Connecting the DC power and power button
Power is supplied through an external AC/DC power adapter DC In. Check the
technical specification section for information about AC/DC power input voltage.
See following figure and a side pictures.
1. DC-Power Jack: External AC/DC power adapter plug into DC-jack (2) and use
the cable mount to fix hole (1), then pull at cable(3).
Mic-In
14
USB#1~5
Signal
Pin 1
USBV
Pin 2
USBD-
Pin 3
USBD+
Pin 4
USBG
EAR-Phone
DC +12V~+24V, 60VA minimum
Advertisement
Table of Contents
