FabiaTech FX5653 User Manual page 32

FabiaTech Corporation
USB transfer time-out
The time-out value for control, bulk, and interrupt transfers.
Available Options: 1 sec, 5 sec, 10 sec, and 20 sec
Default setting: 20 sec
Device reset time-out
USB mass storage device start unit command time-out.
Available Options: 10 sec, 20 sec, 30 sec, and 40 sec
Default setting: 20 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the
delay is take from Hub descriptor.
Available Options: Auto, and manual
Default setting: Auto
Mass Storage Devices:
Mass storage device emulation type. If the emulation FDD, recommended
formatted as FAT32 format.
Available Options: Auto, Floppy, Forced FDD, Hard Disk, and CD-ROM
Default setting: Auto
28