Table of Contents
Advertisement
FabiaTech Corporation
This section outlines the errors that may occur when you operate the system,
and also gives you the suggestions on solving the problems.
Topic include:
Trouble Shooting for Post Beep & Error Messages
Technical Reference
Trouble Shooting for Post Beep and Error Messages
The following information informs the Post Beep & error messages. Please adjust
your systems according to the messages below. Make sure all the components
and connectors are in proper position and firmly attached. If the errors still exist,
please contact with your distributor for maintenance.
POST BEEP
Currently there are two kinds of beep codes in BIOS setup.
One indicates that a video error has occurred and the BIOS cannot initialize
the video screen to display any additional information. This beep code
consists of a single long beep followed by three short beeps.
The other indicates that an error has occurred in your DRAM. This beep code
consists of a constant single long beep.
CMOS Battery Low
When the CMOS battery is out of work or has run out, the user has to replace it with
a new battery.
Chapter 5 Technical Reference
66
Advertisement
Table of Contents
