Table of Contents
Advertisement
FabiaTech Corporation
SETP3 : Reserving partition as hibernation partition:
Launch Disk Partitioning tool – standard tool available in Windows 7.
Go to
Type diskpart.exe and press enter.
Click on yes when it prompts for User Account Control DiskPart. A new
window for diskpart will show up as shown below.
Type the following commands in the command prompt:
DISKPART> list disk
DISKPART> select disk X
(X is disk number where you want to create the store partition. Refer to
results from "list disk" for exact disk number.)
DISKPART> create partition primary
DISKPART> detail disk
DISKPART> select Volume X
(X is Volume of your store partition. Refer to results from "detail disk" for
exact volume number.)
DISKPART> set id=84 override
(The id must be set to 84.)
. Type cmd.exe in the search bar.
58
Advertisement
Table of Contents
