FabiaTech Corporation
iFFS setup procedure
STEP1: Install WIN7 on SSD.
While installing, partition a portion of SSD which will be used for iFFS.
Size of this partition has to be a minimum of the DRAM size.
It is recommended, if possible, to make this partition at least as big as the
largest DRAM that can be used on this platform.
largest DRAM that can be used on this platform.
STEP2 : Once OS is installed, perform the following partition steps. This is necessary
STEP2 : Once OS is installed, perform the following partition steps. This is necessary
for BIOS to identify the partition on SSD that it needs to use for iFFS.
for BIOS to identify the partition on SSD that it needs to use for iFFS.
Master Boot Record format:
Master Boot Record format:
Go to Control Panel-> System and Security-> Administrative Tools->
Go to Control Panel-> System and Security-> Administrative Tools->
Computer Management-> Disk Management.
Computer Management-> Disk Management.
Select the allocated partition on SSD for iFFS.
Select the allocated partition on SSD for iFFS.
Right click, select "Shrink Volume".
Right click, select "Shrink Volume".
Enter at least the DRAM
size or if possible the
maximum DRAM size
that the system supports.
57
big as the