Table of Contents
Advertisement
FabiaTech Corporation
Watchdog Timer
This section describes how to use the Watchdog Timer, including disabled, enabled,
and trigger functions.
The system is equipped with a programmable time-out period watchdog timer.
You can use your own program to enable the watchdog timer. Once you have
enabled the watchdog timer, the program should trigger the I/O every time before
the timer times out. If your program fails to trigger or disable this timer before it
times out, e.g. because of a system hang-up, it will generate a reset signal to reset
the system. The time-out period can be programmed to be set from 1 to 65535
seconds or minutes.
60
Advertisement
Table of Contents
