Sam4s ER-390 SERIES Service Manual page 19

3-2 Installation
3-2-3 RS-232C Serial Cable Installation
1. Connect the RS-232C serial cable to the RS-232C serial port on the right side of ECR.
2. Secure the serial cable with screws.
3. Connector the other end of the RS-232C serial Cable to your host computer.
3-2-4 Options
No. Item
1 Spool
2 Dust Cover
3 Memory
4 Ass'y MCR
3-2-5 Supplies
No. Item
1 Paper Roll
2 Mode Key
3 User Manual
4 Spool
SAM4S ER-390 SERIES
Figure 3-3 Cable Installation
Description
1 EA
-
SRAM 4MBITs (4MBITs * 1)
1 EA
Table 3-1 Option
Description
1 EA
VD, REG, Z, P, C
1 EA
1 EA
Table 3-2 Supplies
3 Installation and Operation
Remark
On Main PBA
Dealer Option
Remark
3-3