Floor Protector - Breckwell SWC31 Owner's Operation And Instruction Manual

FLOOR PROTECTOR

Your wood stove should be placed on a 1 inch, non-combustible surface with a k factor of 0.84. For multiple layers,
add R-values of each layer to determine the overall R-value. Th e R value for the required board is 1.03. If there
is a horizontal section of chimney connector, the fl oor protector should go under it and 2 inches beyond each
side To calculate R-Values for alternative methods, see ALTERNATE FLOOR PROTECTOR CALCULATIONS
section in this manual.
Th e fl oor protector should exceed the stove as follows:
6
Dimension
H ⃰ ⃰ Front
J** Left
K** Right
L** Back
M Total Width
N Total Length
* Canadian installations require 18" (457mm)
** Canadian installations require 8" (203mm)
Inch mm
16 635
6 153
6 153
1 25
46 1169
53.5 1359
Ussc