Assembly Instructions; Blower Assembly - Breckwell SWC31 Owner's Operation And Instruction Manual

ASSEMBLY INSTRUCTIONS

Blower Assembly

THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL SUPPLY BEFORE
ATTEMPTING THE INSTALLATION.
THE BLOWER ASSEMBLY IS INTENDED FOR USE ONLY WITH A STOVE THAT IS MARKED TO INDICATE SUCH USE.
DO NOT ROUTE THE SUPPLY CORD NEAR OR ACROSS HOT SURFACES!
Step 1.
Fix the assembly to the back of the stove with the four screws provided.
4
Ash Pan Assembly
Remove ash pan from fi rebox. Under the fi rebox, there
are two brackets; Slide the ash pan into these brackets.
Ussc