Factory Built Chimney - Breckwell SWC31 Owner's Operation And Instruction Manual

FACTORY BUILT CHIMNEY :

When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed.
You must also purchase (from the same manufacturer) and install the ceiling support package or wall pass-
through and "T" section package, fi restops (where needed), insulation shield, roof fl ashing, chimney cap, etc.
Maintain proper clearance to the structure as recommended by the manufacturer. Th e chimney must be the
required height above the roof or other obstructions for safety and proper draft operation.
10 Ussc