Eneo VMC-32LCD-PW2 Installation And Operating Instructions Manual page 61

Blending
Use the Blending setup menu to change the opaqueness of the background of the OSD.
Use the following steps to change the OSD Blending:
Step Action
1 Press or until Blending is selected.
2 Select the desired value using the or button.
Time
Use the TIME setup menu to adjust the on-screen display time.
Use the following steps to change the OSD time:
Step Action
1
Press or until Time is selected.
2
Select the desired time using the or button.
System Code
Use the System Code setup menu to set the address of the monitor.
Use the following steps to change the System Code:
Step Action
1 Press or until System Code is selected.
2
Select the desired channel (0 to 9) using the or button.
6