Eneo VMC-32LCD-PW2 Installation And Operating Instructions Manual page 46

• Camera Adjustment
The picture quality of each camera can be adjusted by using the Camera Adjust setup menu.
There are five options for adjustment of each camera picture.
* Tint is only for the NTSC system.
Use the following steps to set the screen of each camera:
Step Action
1
Press or to select the option to be adjusted.
2
Select the desired camera number and set the desired value using or .
3
Press the MENU button.
• Alarm Setup
Overview
The alarm setup screen allows you to select the alarm input options, the video loss alarm on/off, the motion alarm and other options.
External Alarm Setup
Alarm Input defines the way the connector responds to external input, in terms of whether it is normally open (NO), normally closed (NC), or they ignore the input.
The default is OFF.
The alarm input setup screen allows you to set these options:
Camera Adjust
Camera Title CA1
Contrast 30
Brightness 20
Color 30
Tint * 25
Sharpness 0
Alarm
Alarm Input
Video Loss
Motion Set
Covert
Replay
History
Alarm Input
Alarm Input OFF
Latch OFF
Beep Time 00 SEC
Relay Time 00 SEC
46