Chapter 3: Getting to Know the EP10
Settings
The Task Manager screen lists all running tasks (applications). This applet provides a number of options to
manage your opened applications.
•
End Task: To shut down an application, highlight the program in the list, and tap on the End Task
softkey in the taskbar at the bottom of the screen.
•
End All Tasks: To shut down all applications, tap on the Menu softkey, and choose End All Tasks.
•
Switch To: To make an application listed in this screen active, highlight the application, and tap on
Menu>Switch To.
For additional information about the Task Manager, refer to "Task Manager" on page 183.
3.16
Settings
•
Tap Start>Settings to display the setting options for your EP10.
Figure 3.6
Along with icons that provide information about your unit and allow you to adjust the appearance and be-
haviour of your EP10, an additional group of icons is stored in three folders – Personal, System and Connec-
tions. Refer to Chapter 5: "Settings" for details about the options available to you.
3.17
Data Transfer Between the EP10 and a PC
Data transfer options vary slightly depending on the type of operating system installed in your PC.
For Windows XP SP2 operating systems or earlier, Microsoft
used to connect your EP10 to a PC.
If the Windows Vista
quired to transfer data between your EP10 and your PC.
By connecting the EP10 to a PC with a cable, you can:
•
View EP10 files from Windows Explorer.
•
Drag and drop files between EP10 and the PC in the same way that you would between PC drives.
•
Back up EP10 files to the PC, restore them from the PC to the hand-held again, etc.
44
Psion EP10 Hand-Held Computer User Manual
Settings Icons
®
, Windows 7 or later, operating system is installed in your PC, ActiveSync is not re-
®
®
ActiveSync
connectivity software can be