Options Tab - Psion EP10 User Manual

Note: For details about setting up your imager, refer to Appendix C: "Imagers Applet".
• Tap on Start>Settings, and then tap on the System followed by the Scanners icon.
5.11.21.1

Options Tab

The Options tab allows you to tailor the double-click parameters, the display options, and the data handling
options associated with your scanner.
5.11.21.1.1 Double Click Parameters
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the
first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowa-
ble range is 0 to 1000. A value of zero disables this feature.
A double-click produces different results depending on whether or not a value is assigned in the "Click
Data" parameter. When a value is not assigned for the "Click Data", double-clicking the scanner trigger
overrides the target dot delay set in the "Dot Time" parameter and initiates a normal scan sweep. If a value
is assigned for the "Click Data" parameter, double-clicking the scanner trigger inserts the "Click Data"
value rather than initiating a scan.
Psion EP10 Hand-Held Computer User Manual
Chapter 5: Settings
Scanner Settings
175