Proxy Server Tab - Psion EP10 User Manual

Chapter 5: Settings
Network Cards
Changing a Connection Setting Name
Your EP10 has two sets of connection settings: My ISP and My Work Network. If you want to change one or
both of these options to something more familiar to you, follow these steps.
• Tap on Start>Settings. Tap on the Connections folder icon followed by the Connections icon.
• Under My Work Network or My ISP, tap on Manage existing connections.
• Tap on the General tab.
• Type the name you prefer in the field below Enter a name for these settings.
• Tap on OK.
5.8.7.4

Proxy Server Tab

Note: If you are connected to your ISP or private network during synchronization, the EP10 will download
the appropriate settings during synchronization from your PC. If these settings are not on your PC,
or if they need to be changed, you'll need to set up the proxy server connection manually.
To set up the proxy server connection manually, you'll need the following information: proxy server name,
server type, port, type of Socks protocol used and the user name and password.
• Tap Start>Settings. Tap on the Connections tab followed by the Connections icon.
• Under My Work Network, tap on Set up my proxy server.
• Tap in the checkbox next to This network connects to the Internet and This network uses a proxy
server to connect to the Internet.
• In the Proxy server field, type the proxy server name.
• Tap on OK to save your changes.
122
Psion EP10 Hand-Held Computer User Manual