Pairing A Device - Psion EP10 User Manual

Chapter 5: Settings
Bluetooth Setup
5.8.2.2

Pairing a Device

Before pairing a headset or any other Bluetooth device with your EP10, make certain that the Bluetooth
device power is enabled; it is enabled by default. If, for some reason, it has been disabled:
• Tap on Start>Settings>Connections icon and then, tap on the Wireless Manager icon.
• If the Bluetooth option is listed as Off, tap on Bluetooth to turn the radio on.
Note: There is another route to enabling your Bluetooth radio – tap on Start>Settings>Con-
To pair a device (a headset, for example), power the device on, and bring it within 10 meters of the EP10
before proceeding with the discovery process described below. Set the device to visible so that the EP10
can detect it and establish a connection.
To pair devices:
• Follow the manufacturer's instructions to place the remote device in pairing mode.
• Choose the Devices tab and Scan for devices in your area.
• When the scan is complete, tap on the device to which you want to pair.
• In the pop-up menu, choose Pair.
An authentication dialog box is displayed.
• If the remote device has authentication enabled, type the PIN in this dialog box.
• To proceed without authentication, tap on Next.
Note: If a remote device has authentication enabled and you've skipped the authentication process, a
After entering the device PIN, the Services dialog appears with a list of services available for that device.
108
Psion EP10 Hand-Held Computer User Manual
nections>Bluetooth icon. In the scrolling tab bar at the top of the screen, display the Mode
tab, and select Turn on Bluetooth. Tap OK. Note that if you want your EP10 to be visible to
other Bluetooth devices, tap on Discoverable.
pop-up screen will ask if you want to allow the remote device to connect to the EP10. Tap on Yes and
type the PIN. When authentication is complete, tap on Done.