The Devices Tab - Scanning For Bluetooth Devices - Psion EP10 User Manual

Chapter 5: Settings
Bluetooth Setup
When two Bluetooth-equipped devices come within a 10 meter range of each other, they can establish a
connection. Because Bluetooth utilizes a radio-based link, it does not require a line-of-sight connection in
order to communicate.
• Tap on Start>Settings. Tap on the Connections Folder icon followed by the Bluetooth icon.
Turning the Bluetooth Radio On
Before pairing a headset or any other Bluetooth device with your EP10, make certain that the Bluetooth
device power is enabled and that the radio is switched on; it is enabled by default. If, for some reason, it has
been disabled:
• Scroll to the on Mode tab.
• Tap in the checkbox next to Turn on Bluetooth.
• Turn your Bluetooth device on and place it within a few feet of your EP10.
• If needed, set your Bluetooth device to visible (discoverable) so that the hand-held can detect it and
establish a connection.
5.8.2.1

The Devices Tab - Scanning for Bluetooth Devices

• Scroll to the Device tab.
• To discover and list all Bluetooth devices in range of the EP10, tap on the Scan button in the softkey bar
at the bottom of the screen.
The EP10 scans for Bluetooth devices within a 10 meter range. Any Bluetooth devices within range appear in
the Bluetooth list box. Any existing devices previously discovered and listed will also be displayed.
106
Psion EP10 Hand-Held Computer User Manual