Auto Lock Tab - Psion EP10 User Manual

• Type the scancode in hexadecimal in the field labelled Scancode.
Note: The Label field displays the default function of the scancode you are remapping.
Virtual Key, Function and Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scancode will
be remapped to: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent. If
No Force is selected, the shift state is dependent on whether the shift state is on or off at the time the
virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
• Choose Virtual Key>Function or Macro.
• Choose a function from the Function list, and tap on OK.
Editing a Scancode Remap
• In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.
Removing a Remap
• In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Menu
button, and choose Remove.
• Tap on OK.
5.9.2.7

Auto Lock Tab

The Auto Lock tab allows you to choose the auto lock behaviour of the EP10 based on the options selected
in this screen.
Psion EP10 Hand-Held Computer User Manual
Chapter 5: Settings
Buttons
141