Servers Tab; Mode Tab - Psion EP10 User Manual

Chapter 5: Settings
Bluetooth Setup
5.8.2.3

Servers Tab

When a remote Bluetooth device initiates a Bluetooth connection to the EP10, the remote device is consid-
ered the 'Bluetooth master' and the hand-held, the 'Bluetooth slave'. In order for the remote device to
connect to the EP10, the EP10 must offer a service in the form of a server. The Servers tab allows these
services to be enabled and configured. There are three server services available: Serial, Scanner and
OBEX OPP.
Serial server enables the Serial Port Profile server; a Serial Port can be selected from the drop-down menu.
Keep in mind that when a port is chosen, an application must be open (connected) to the chosen port for a
remote device to be able to connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service (SCS). This is
used for Bluetooth bar code scanners that operate in client mode. SCS opens the server port and handles
the scanner input.
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed on the EP10
after a change is made to this option. The OPP Server allows other Bluetooth devices to send files to
this device.
• Tap on the checkbox to activate the server – the associated port name is displayed beside the
server name.
5.8.2.4

Mode Tab

When Turn on Bluetooth is checked, Bluetooth features are available. If this option is disabled, you cannot
send or receive information using Bluetooth.
110
Psion EP10 Hand-Held Computer User Manual