•
To define how long the backlight should stay on when the EP10 is not in use, tap in the checkbox to the
left of Turn off backlight if device is not used for.
Note: This option is essentially 'suspend' mode. If the backlight is turned off, tapping on the screen or
pressing a key displays the screen in which you were working before the backlight turned off.
•
Tap on the drop-down menu, and choose the number of seconds or minutes the backlight will remain
on when the hand-held is idle.
•
To Turn on backlight when a button is pressed or the screen is tapped, tap in the checkbox to the
left of this option.
5.11.2.4
External Power Tab
This tab determines the behaviour of the backlight when the hand-held is using external rather than
battery power. Refer to the instructions in "Battery Power Tab" in the previous section for details.
5.11.3
Certificates
•
Tap on Start>Settings, and then tap on the System icon.
•
Tap on the Certificates icon.
A public key is transmitted as part of a certificate. The certificates listed in the Certificates tabs ensure that
the submitted public key is, in fact, the public key that belongs to the submitter. The hand-held checks that
the certificate has been digitally signed by a certification authority that the hand-held explicitly trusts.
Your EP10 has certificates already preinstalled in the unit. Personal certificates establish your identity, in-
termediate certificates, as the name suggests, identifies intermediate certification authorities and root cer-
tificates establish the identity of the servers with which you can connect.
5.11.3.1
Choosing a Certificate
Normally, certificates already configured for your network are chosen automatically by the EP10. If a certif-
icate cannot be chosen automatically, you must choose it from the Certificates list.
•
To choose a certificate, tap the desired certificate. Your EP10 will connect automatically.
Psion EP10 Hand-Held Computer User Manual
Chapter 5: Settings
Certificates
145