Psion Omnii Quick Start Manual

Contents of the Box

Omnii This Guide Additional Documentation
(dependent on order)
features
front, right and Left
Speaker
LEDs
Beeper
Volume
Rocker Button
Vertical
Scroll
Button
Scan Button
ENTER
Button
Microphone
Battery Release Button
features and variants
expansion BaCk Cover
Camera
Expansion Back Cover with
Blanking Plate Scanner/Imager Pod
PTT Speaker
Version without Scanner Version with Scanner
Note: GPS radio and end-cap, PTT speaker, and camera are all options
available with the Expansion Back Cover.
standard BaCk Cover
Standard Back Covers can support a variety of scanners and imagers.
Standard Back Cover
Version with pistol grip
Note: For all variants of both back covers, a pistol grip is available.
Battery Compartment
miCrosd and sim Card sLots
To insert a microSD or SIM card:
> Press the battery release buttons to remove the battery.
> Use a Phillips screwdriver to remove the SD cover screw.
> Flip the cover open.
SD Cover microSD
Card Slot
SIM Card Slot
microSD card
> Slide the microSD door to the left to
unlock it. Flip it open.
> Slide the microSD card onto the
guides on the SD card door.
> Close the microSD door, and slide it
to the right to lock it.
SIM card
> Slide the SIM card metal door latch
to the right to unlock it. Flip it open.
> Slide the SIM card into the guides on
the SIM card door.
> Close the SIM card door, and slide the
metal door latch to the left to lock it.

getting started

1
Insert the Battery
2
Snap the Battery into Place
Press down firmly on both sides of the battery to ensure that it
is securely seated in Omnii.
over
>