About Tab; Paired Tab - Psion EP10 User Manual

When Discoverable is enabled, other Bluetooth devices within range (approximately 10 meters) can detect
your EP10 and can establish a bond or use a Bluetooth service. Note that other devices can detect your unit
whether or not a bond has been created.
If Allow Bluetooth to wake system is enabled, this feature allows remote Bluetooth devices to wake the EP10
by requesting a Bluetooth service that requires host intervention. This feature can also be used, when the
EP10 is waking from suspend, to significantly to reduce the initialization time of Bluetooth system.
5.8.2.5

About Tab

Name displays the broadcasted name of the EP10. The name can be changed in the About applet – tap on
Start>Settings>System tab>About icon. Tap on the Device ID tab, and change the name.
Local Address displays the MAC address (BD_Addr) of the Bluetooth chip.
HCI Version & LMP Version display the version of the chip firmware.
Component indicates the version of the Psion Bluetooth Subsystem (the manager, drivers, etc).
Profiles lists the supported profiles on this specific EP10.
5.8.2.6

Paired Tab

This tab lists all paired devices and their corresponding services. The format of the name is <Device
Name>:<Service Name>. Additional information may appear in this screen such as the Port Numbers for
Serial Profiles service.
• Tap and hold down the stylus on an item in the Paired tab to display an associated pop-up menu.
Psion EP10 Hand-Held Computer User Manual
Chapter 5: Settings
Bluetooth Setup
111