Lock Sequence Tab - Psion Omnii User Manual

Virtual Key, Function and Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scancode will
be remapped to: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent. If
No Force is selected, the shift state is dependent on whether the shift state is on or off at the time the
virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
• Choose Virtual Key>Function or Macro.
• Choose a function from the Function list, and tap on OK.
Editing a Scancode Remap
• In the Scancode Remapping tab, tap on the remap you want to edit.
• Tap on the Edit button, and make the appropriate changes.
• Tap on OK to save your changes.
Removing a Remap
• In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Menu
button, and choose Remove.
• Tap on OK.
5.9.2.7

Lock Sequence Tab

The Lock Sequence tab allows you to lock the hand-held keyboard to prevent keys from being pressed acci-
dentally when, for example, the unit is inserted in a holster.
• To lock the keyboard, tap in the checkbox next to Enable key lock sequence.
• Tap in the checkbox next to Keyboard locked at startup.
• In the Key sequence drop-down menu, choose the key sequence you need to type to unlock the
keyboard.
• Reset the Omnii – press and hold down the [BLUE/FN] key and the Power button.
Note: It is useful to leave the Show popup message enabled (default) so that anyone attempting to use
the Omnii keyboard will see the key sequence they will need to enter to unlock the keyboard dis-
played on the screen.
A locked keyboard icon is displayed in the softkey bar when the keyboard is locked.
Psion Omnii Hand-Held Computer User Manual
Chapter 5: Settings
Buttons
137