Table of Contents
Advertisement
Charging System
Drive Belt Inspection
Check that the auto-tensioner indicator (A) is within the
standard range (B) as shown. lf it is out of the standard
range, replace the drive belt (see page 4-32).
4-32
Drive Belt Replacement
I
1. Unclip the power steering reservoir.
2. Move the auto-tensioner (A)to relieve tension from
the drive belt (B), and remove the drive belt.
3. Installthe new belt in the reverse order of removal.
+
-.
Advertisement
Chapters
Table of Contents
Troubleshooting
