Acura 2002 RSX Service Manual page 105

Engine Assembly
Engine Removal (cont'd)
28. Oisconnect the air fuel ratio (4,/F) sensor connector
(A) and secondary heated oxygen sensor
(secondary H02S) connector (B).
Remove the three way catalytic converter (TWC)
assembly (C).
Disconnect the suspension lower arm ball joints
(see page '18-10) and stabilizer links (see page 1g-
't7l.
Remove the driveshafts (see page 16-3). Coal all
precision finished surfaces with clean engine oil.
Tie plastic bags over the driveshaft ends.
29.
30.
3 1 .
-
\ .
. - ,
5-6
32. Remove the shift cable hotder (A), then remove the
shift cable cover 1B). To prevent damage to the
control lever ioint, be sure to remove the bolts
securing the shift cable cover (Ar|-).
Remove the spring clip (C) and controt pin (D), then
separate the shift cable (E) from the control lever
(F) (A,/T).