Onboard Device; Onboard Lan Boot Rom; Usb Controller - DFI LT600-DR/D/L User Manual

Onboard Device

Move the cursor to this field and press <Enter>. The following
screen will appear.
PCI Express GIGA LAN 1
PCI Express GIGA LAN 2

Onboard Lan Boot ROM

USB Controller

USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Azalia Audio Select
↑↓→←
: Move Enter: Select
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
PCI Express GIGA LAN 1
This field is used to enable or disable the onboard LAN 1.
PCI Express GIGA LAN 2 (LT600-DR/D only)
This field is used to enable or disable the onboard LAN 2.
Onboard LAN Boot ROM
Enable this field if you wish to use the boot ROM (instead of a disk
drive) to boot-up the system and access the local area network
directly.
If you wish to change the boot ROM's settings, type the <Shift> and
<F10> keys simultaneously when prompted during boot-up. Take
note: you will be able to access the boot ROM's program (by typing
<Shift> + <F10>) only when this field is enabled.
USB Controller
This field is used to enable or disable the USB ports.
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Device
Auto
Auto
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
3
7 7