Lan Ports - DFI LT600-DR/D/L User Manual

2
Hardware Installation

LAN Ports

LAN 1
LAN 2
(LT600-DR/D
only)
The two RJ45 LAN ports on the LT600-DR/D allow the system
board to connect to a local area network by means of a network
hub.
LT600-L is equipped with the LAN 1 port only.
BIOS Setting
Configure the onboard LAN in the in the Integrated Peripherals
submenu ("Onboard Device" section) of the BIOS. Refer to chapter
3 for more information.
Driver Installation
Install the LAN driver. Refer to chapter 4 for more information.
37