Power Management Setup; Acpi Function - DFI LT600-DR/D/L User Manual

Power Management Setup

The Power Management Setup allows you to configure your system
to most effectively save energy.

ACPI Function

ACPI Suspend Type
Run VGABIOS if S3 Resume
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
Soft-Off By PWR-BTTN
Wake-Up by PCI Card
Power On by Ring
USB KB Wake-Up From S3
Resume By Alarm
x Date(of Month) Alarm
x Time (hh:mm:ss) Alarm
** Reload Global Timer Events **
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]#
↑↓→←
: Move Enter: Select
F5: Previous Values
The screen above list all the fields available in the Power Management Setup
submenu, for ease of reference in this manual. In the actual CMOS setup, you have
to use the scroll bar to view the fields. The settings on the screen are for refer-
ence only. Your version may not be identical to this one.
ACPI Function
This function should be enabled only in operating systems that sup-
port ACPI. If you want to use the Suspend to RAM function, make
sure this field is enabled then select "S3(STR)" in the "ACPI Suspend
Type" field.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
S3(STR)
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S3(STR)
Auto
User Define
DPMS
Yes
Stop Grant
3
Disabled
Instant-Off
Enabled
Disabled
Disabled
Disabled
0
0 : 0 : 0
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
8 3