Table of Contents
Advertisement
3
BIOS Setup
Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Onboard LAN 1 Control and Onboard LAN 2 Control
These fields are used to enable or disable the onboard LAN chips.
Onboard LAN Rom Control
Enable this field if you wish to use the boot ROM (instead of a disk
drive) to boot-up the system and access the local area network
directly.
If you wish to change the boot ROM's settings, type the <Shift> and
<F10> keys simultaneously when prompted during boot-up. Take
note: you will be able to access the boot ROM's program (by typing
<Shift> + <F10>) only when this field is enabled.
74
Phoenix - AwardBIOS CMOS Setup Utility
Onboard LAN 1 Control
Onboard LAN 2 Control
Onboard LAN Rom Control
: Move
Enter: Select
Onboard Device
Auto
Auto
Disabled
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
