Features - DFI LT600-DR/D/L User Manual

1
Introduction

Features

watchdog timer
the set time interval. If the system hangs or fails to function, it will
reset at the set time interval so that your system will continue to
operate.
DDR2
GB per second and beyond. That is twice the speed of the conven-
tional DDR without increasing its power consumption. DDR2
SDRAM modules work at 1.8V supply compared to 2.6V memory
voltage for DDR modules. DDR2 also incorporates new innovations
such as the On-Die Termination (ODT) as well as larger 4-bit pre-
fetch against DDR which fetches 2 bits per clock cycle.
graphics
ceptional 3D graphics performance.
5.1-channel audio
audio utility is configured to support this function. The mic-in at the
rear will be disabled. Use the front audio's mic-in jack.
S/PDIF
having to be converted first to an analog format. This prevents the
quality of the audio signal from degrading whenever it is converted
to analog. S/PDIF is usually found on digital audio equipment such as
a DAT machine or audio processing device. The S/PDIF connector on
the system board sends surround sound and 3D audio signal out-
puts to amplifiers and speakers and to digital recording devices like
CD recorders.
10
The Watchdog Timer function allows your
application to regularly "clear" the system at
DDR2 is a higher performance DDR technology
whose data transfer rate delivers bandwidth of 4.3
The Intel northbridge chip comes integrated with the
Intel Graphics Media Accelerator 950 delivering ex-
The audio jacks at the rear panel will
support 5.1-channel audio only when the
S/PDIF is a standard audio file transfer format that
transfers digital audio signals to a device without