Telecommunications Terminal Equipment Directive; Ce Mark; Rohs Compliance; Emc (Electromagnetic Compatibility) Compliance - Comtech EF Data CDM-740 Installation And Operation Manual

CDM-740 Advanced Satellite Modem
Preface

Telecommunications Terminal Equipment Directive

In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC, this
equipment should not be directly connected to the Public Telecommunications Network.

CE Mark

Comtech EF Data declares that the CDM-740 modem meets the necessary requirements for the
CE Mark.

RoHS Compliance

This unit satisfies (with exemptions) the requirements specified in the European Union Directive on
the Restriction of Hazardous Substances, Directive 2002/95/EC, (EU RoHS).

EMC (Electromagnetic Compatibility) Compliance

In accordance with European Directive 89/336/EEC, the CDM-740 Modem has been shown, by
independent testing, to comply with the following standards:
Emissions:
Immunity:
Additionally, the CDM-740 has been shown to comply with the following standards:
To ensure that the Modem continues to comply with these standards, observe
the following instructions:
IMPORTANT
•
Connections to the transmit and receive IF ports (BNC female connectors) should be
made using a good quality coaxial cable - for example RG58/U (50Ω or RG59/U (75Ω).
EN 55022 Class B - Limits and methods of measurement of radio
interference characteristics of Information Technology Equipment.
(Also tested to FCC Part 15 Class B)
EN 50082 Part 1 - Generic immunity standard, Part 1: Domestic,
commercial and light industrial environment.
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-9
EN 61000-4-11
EN 61000-4-13
Harmonic Currents Emission
Voltage Fluctuations and Flicker
ESD Immunity
EFT Burst Immunity
Surge Immunity
RF Conducted Immunity
Power frequency Magnetic Field Immunity
Pulse Magnetic Field Immunity
Voltage Dips, Interruptions, and Variations Immunity
Immunity to Harmonics
xiv
Revision 0
MN-CDM740