Airflow Direction Control - Hisense AUD-18UX4SGKL User And Installation Instructions Manual

Airflow direction control

Airflow direction control
Vertical airflow is automatically adjusted to a certain angle
in accordance with the operation mode after turning on the unit.
Operation mode Direction of airflow
horizontal
COOLING, DRY
*HEATING,
downward
FAN ONLY
*Heating mode is only available for heat pump models.
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle
as you like.
Swinging airflow
Pressing "SWING" button once, the horizontal adjustment
louver will swing up and down automatically.
Desired direction airflow
Pressing the "SWING" button again when the louvers swing
to a suitable angle as desired.
Do not turn the horizontal adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit
first and cut off the power supply, then restore power supply again.
Horizontal airflow control (with hands)
It is better not to let the horizontal adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
remote controller operation manual
(invalid for this model)
The direction of airflow can be
also adjusted to your own
requirement by pressing the
"SWING" button of the
remote controller.
27
ON
OFF
FAN
MODE
5