Wireless Remote Controller Introduce; Remote Controller - Hisense AUD-18UX4SGKL User And Installation Instructions Manual

Remote controller

4.Wireless remote controller
4.1 Remote controller
The remote controller transmits signals to the system.
ON/OFF BUTTON
1
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
MODE BUTTON
2
Press this button to select the operation mode.
3
FAN BUTTON
Used to select fan speed in sequence
auto, high, medium or low.
ROOM TEMPERATURE
4 5
SETTING BUTTONS
Used to adjust the room temperature and
the timer, also real time.
6
SMART BUTTON
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
SWING BUTTON
7
Used to stop or start
louver swinging and set the desired up/down
airflow direction.
SLEEP BUTTON
8
Used to set or cancel Sleep Mode operation.
DIMMER BUTTON
9
The screen brightness is decreased each time
that button is pressed and it goes blank after
pressing the button four times.
10 CLOCK BUTTON
Used to set the current time.
11 12 TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
SUPER BUTTON
13
Used to start or stop the fast cooling.
(Fast cooling operates at high fan speed with
18℃ set temp automatically)
14 MUTE BUTTON
Used to set or cancel Mute mode operation
Indication symbols on LCD:
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Soft indicator
Note: Each mode and relevant function will be further specified in following pages.
-
H1
(invalid for this model)
horizontal adjustment
(invalid for this model)
(invalid for heating mode)
.
Auto fan speed
High fan speed
Medium fan speed
Low fan speed
Cancel I feel indicator
1
13
3
10
2
7
6
18*
14
15
I FEEL BUTTON
15
Used to start or stop the I feel mode. Press this
button above 5 seconds , Turn off I FEEL mode.
(In I feel mode,the Air Conditioner operates basis
temperature sensor fitted in remote instead of machine,
Advice to use I FEEL mode and the remote put
where the indoor unit receive signal easily.)
16
TEP SWITCH BUTTON
Display set temperature flickeringly when the button is
pressed. Display indoor temperature when the button
is pressed again. And the flicker must be closed by
pressing the button or cutting off the electricity supply.
17 SOFT BUTTON
Used to limit the maximum electric current,so that
you can use it with other electric instrument when
power is not enough.
SWING BUTTON
18*
Used to stop or start
louver swinging and set the desired left/right
airflow direction.
*Some remote controller models without this button.
Smart indicator
Sleep indicator
Mute indicator
Super indicator
10
MODE CLOCK
TIMER ON TIMER OFF
SMART SLEEP DIMMER
SWING
SWING MUTE
TEP SWITCH
I FEEL SOFT
(invalid for this model)
( only effective for DC inverter model)
(invalid for this model)
vertical adjustment
Signal transmit.
Display set timer
Display current time
Display set temperature
4
5
12
11
9
8
16
17