Hange Of Static Pressure C - Hisense AUD-18UX4SGKL User And Installation Instructions Manual

6.2 change of Static pressure
The static pressure outside the indoor unit can be chosen .
6.2.1 Models except 24K & 36K (High-Efficiency DC-Invert type ):
You can change the static pressure by changing the fan motor terminal which refer to following Fig6.2.
Low static pressure
High static pressure
Model
18K
24K,36K
48K,60K
Note:
Default Settings is
The noise under high static pressure is higher than static pressure .
6.2.2 24K & 36K (High-Efficiency DC-Invert type ):
Default static pressure is 30 Pa.
The static pressure can be freely adjusted from 1 Pa to 80 Pa by using specific wire remote controller.
Operation details, please refer to wire remote controller manuals .
If you still have any trouble, please contact local technical service center of our company for further information.
WHT
RED
Fig 6.2
Low static High static
pressure
pressure
10Pa
30Pa
50Pa
80Pa
80Pa 120Pa
low static pressure by factory.
Installation and Maintenance
41
Fan motor