2 . Remote Controller-J1 - Hisense AUD-18UX4SGKL User And Installation Instructions Manual

Remote controller
Remote controller
4.2
The remote controller transmits signals to the system.
ON/OFF BUTTON
1
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
MODE BUTTON
2
Press this button to select the operation mode.
3 FAN BUTTON
Used to select fan speed in sequence
auto, high, medium or low.
ROOM TEMPERATURE
5
4
SETTING BUTTONS
Used to adjust the room temperature and
the timer, also real time.
6
SMART BUTTON
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
SWING BUTTON
7
Used to stop or start
louver swinging and set the desired up/down
airflow direction.
8
SLEEP BUTTON
Used to set or cancel Sleep Mode operation.
9
I FEEL BUTTON
Used to start or stop the I feel mode. Press this
button above 5 seconds , Turn off I FEEL mode.
(In I feel mode,the Air Conditioner operates basis
temperature sensor fitted in remote instead of machine,
Advice to use I FEEL mode and the remote put
where the indoor unit receive signal easily.)
CLOCK BUTTON
10
Used to set the current time.
11 12
TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
13
SUPER BUTTON
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
18℃ set temp automatically ; Fast heating
operates at auto fan speed with 32℃ set temp
automatically )
Indication symbols on LCD:
Cooling indicator
Dry indicator
Fan only indicator
Heating indicator
Display is invalid
Note: Each mode and relevant function will be further specified in following pages.
J1
(invalid for this model)
horizontal adjustment
Auto fan speed
High fan speed
Medium fan speed
Low fan speed
1
ON/OFF
3
2
7
MODE
6
SWING
12
SMART
15
TIMER ON TIMER OFF
SWING
*Note：Some remote controller models without buttons in the
dashed circle.
DIMMER BUTTON
14
The screen brightness is decreased each time
that button is pressed and it goes blank after
pressing the button four times.
15 SWING BUTTON
Used to stop or start
louver swinging and set the desired left/right
airflow direction.
Smart indicator
Sleep indicator
I feel
Super indicator
17
ON ON
OFF OFF
FAN
SLEEP SUPER
IFEEL DIMMER
CLOCK
(invalid for this model)
(invalid for this model)
vertical adjustment
Signal transmit
Display set timer
ON
OFF
Display current time
Display set temperature
4
5
8
13
9
14
11
10