Airflow Direction Control - Hisense Essense User Manual

Operation instructions

Airflow direction control

Vertical airflow(Horizontal airflow) is automatically adjusted to a certain angle in accordance
with the operation mode after turning on the unit.
Operation mode
COOLING, DRY
*HEATING,
FAN ONLY
The direction of airflow can bealso adjusted to your own requirement by pressing the "
the remote controller.
*Heating mode is only available for heat pump models.
Vertical airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press " " button once.
Result : The vertical adjustment louver will swing up and down automatically.
Press " " button again .
Result :
The louvers swing to a suitable angle as desired.
Horizontal airflow control (with the remote controller)
Using remote controller to set various angles of flow or specific angle as you like.
Press " " button once.
Result : The horizontal adjustment louver will swing up and down automatically.
Press " " button again .
Result : The louvers swing to a suitable angle as desired.
NOTE:If the unit without four ways airflow function,you can adjust
horizontal airflow by yourself.
A
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit
first and cut off the power supply, then restore power supply again.
B
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
Direction of airflow
horizontal
downward
9
PRESS PRESS
" button of
PRESS
PRESS
PRESS
PRESS