Operation Mode - Hisense AUD-18UX4SGKL User And Installation Instructions Manual

Operation mode

Selecting mode
Each time MODE button is pressed, the operation mode
is changed in sequence:
COOLING DRY
Heating mode is NOT available for cooling only air conditioner.
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
Auto
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, Fan speed is set at "Auto" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to raise temperature setting by 1℃
Press once to lower temperature setting by 1℃
Range of available set temperature
*HEATING, COOLING
FAN
*Note: Heating mode is NOT available for cooling only models.
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
(There is no RUN indicator for this model)
SWING, SMART, TIMER ON, TIMER OFF, SLEEP,CLOCK and SUPER operation modes will be
specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
FAN ONLY
FAN mode
High Medium
Low
18℃~32℃
unable to set
ONLY
Turning on
remote controller operation manual
HEATING
26
ON
OFF
FAN
MODE
1
2