Remove Paper From Standard Output Bin - Toshiba eS305CS User Manual

Troubleshooting
Reinstall missing or unresponsive [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Try one or more of the following:
•
Install the missing imaging kit. For more information, see the "Replacing supplies" section of the User's Guide.
•
Remove the unresponsive imaging kit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging kit may be defective. Replace the
imaging kit.
Reload printed pages in Tray [x]
Try any of the following:
•
From the printer control panel, select Continue to clear the message and continue printing the second side of the
sheet. For non‑touch‑screen printer models, press
• Cancel the print job.
Remove packaging material, [area name]
1
Remove any remaining packing material from the indicated location.
2
From the printer control panel, touch Continue to clear the message. For non‑touch‑screen printer models, press
to confirm.

Remove paper from standard output bin

Remove the paper stack from the standard bin.
Replace [color] cartridge, 0 estimated pages remain [88.xy]
Replace the indicated toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply.
Note: If you do not have a replacement cartridge, then visit our Web site or contact the place where you purchased
the printer.
Replace [color] cartridge, printer region mismatch [42.xy]
Install a suitable toner cartridge.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
to confirm.
163