Toshiba eS305CS User Manual page 188

Troubleshooting
Action
Step 1
a
From the Quality menu on the printer control panel, select Color
Adjust.
b
Resend the print job.
Is the print still too light?
Step 2
a
From the Quality menu on the printer control panel, increase the toner
darkness.
Note: 4 is the factory default setting.
b
Resend the print job.
Is the print still too light?
Step 3
From the printer control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded in the tray.
Is the tray set to the type, texture, and weight of the paper loaded?
Step 4
a
Depending on your operating system, specify the paper type, texture,
and weight from Printing Preferences or from the Print dialog.
b
Resend the print job.
Is the print still too light?
Step 5
Make sure that the paper has no texture or rough finishes.
Are you printing on textured or rough paper?
Step 6
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b
Resend the print job.
Is the print still too light?
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too light?
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.
Go to step 4. Specify the paper type,
texture, and weight
from the tray settings
to match the paper
loaded in the tray.
Go to step 5. The problem is solved.
From the printer Go to step 5.
control panel, set the
paper texture in the
Paper menu to match
the paper loaded in the
tray
Go to step 7. The problem is solved.
Contact customer The problem is solved.
support.
188