Toshiba eS305CS User Manual page 101

Understanding the printer menus
Use
Color Correction
Auto
Off
Manual
Print Resolution
1200 dpi
4800 CQ
Toner Darkness
1–5
Enhance Fine Lines
On
Off
Color Saver
On
Off
RGB Brightness
‑6 to 6
RGB Contrast
0–5
RGB Saturation
0–5
Color Balance
Cyan
‑5 to 5
Magenta
‑5 to 5
Yellow
‑5 to 5
Black
‑5 to 5
Reset Defaults
To
Adjust the color output on the printed page.
Note: Auto is the factory default setting.
Specify the output resolution in dots per inch (dpi) or in color quality (CQ).
Note: 4800 CQ is the factory default setting.
Lighten or darken the output.
Note: 4 is the factory default setting.
Enable a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts.
Note: Off is the factory default setting.
Reduce the amount of toner used for graphics and images.
Notes:
•
Off is the factory default setting.
•
On overrides the Toner Darkness setting.
Adjust the brightness of the output.
Note: 0 is the factory default setting.
Adjust the contrast of the output.
Note: 0 is the factory default setting.
Adjust saturation in color outputs.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the output.
Note: 0 is the factory default setting.
101