MTU 12 V 4000 M33F Operating Instructions Manual page 71

RAW WATER CIRCUIT (open circuit)
Raw water pump: inlet pressure, min.
Raw water pump: inlet pressure, max.
Pressure loss in engine-external raw water
system, max.
LUBE OIL SYSTEM
Lube oil operating temperature before en-
gine, from
Lube-oil operating temperature before en-
gine, to
Lube oil operating pressure before engine,
from
Lube-oil operating pressure before engine,
to
Lube oil operating pressure (low idle)
(meas. point: before engine)
FUEL SYSTEM
Fuel pressure at engine inlet connection,
min. (when engine is starting)
Fuel pressure at supply connection to en-
gine, min. (when engine is running),
Fuel pressure at supply connection to en-
gine (when engine is starting), max.
Fuel supply flow, max.
GENERAL OPERATING DATA
Firing speed, from
Firing speed, to
STARTER (electric)
Rated starter voltage (standard design)
Heat exchanger
installed
L bar -0.4
L bar 1.0
L bar 1.0
Heat exchanger
installed
R °C 84
R °C 92
R bar 5.3
R bar 6.3
R bar --
Heat exchanger
installed
L bar -0.1
L bar -0.3
L bar 1.5
A Liters/
min
Heat exchanger
installed
R rpm 80
R rpm 120
Heat exchanger
installed
R V= 24
MS150069/02E 2014-03 | Product Summary | 71
Heat exchanger
separate
-0.4 --
1.0 --
1.0 --
Heat exchanger
separate
83 84 83
91 92 91
5.3 5.3 5.3
6.3 6.3 6.3
-- --
Heat exchanger
separate
-0.1 -0.1 -0.1
-0.3 -0.3 -0.3
1.5 1.5 1.5
Heat exchanger
separate
80 80 80
120 120 120
Heat exchanger
separate
24 24 24
--
--
--
--