MTU 12 V 4000 M33F Operating Instructions Manual page 220

6.14.2 Oil indicator filter – Cleaning and check
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Cleaning agent (Snow-White 11-0)
Cleaning agent (Hakupur 312)
Engine oil
Strainer
Square-section ring
O-ring
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
NOTICE
Inappropriate cleaning tool.
Risk of damage to component!
• Observe manufacturer's instructions.
• Use appropriate cleaning tool.
Removing strainer
1. Clean oil indicator filter before disassem-
bling it.
2. Remove screws (1).
3. Take off cover (2) with O-ring (3).
4. Take strainer (5) from filter housing.
220 | Task Description | MS150069/02E 2014-03
Part No.
40460
30390
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Qty.
1
1